Solved: Hey guys, I'm looking to upgrade the IOS on a number of 9300 / 9500 switch stacks from a USB data pen (something I've not done before).

Jul 26, 2021 · I have a 4gb usb flash drive formatted as FAT32 and I used it to deploy around 20 9300L switches. Upvote

Feb 14, 2023 · For information about formatting and unmounting an SSD, see "Configuring USB 3.0 SSD" section in the Interface and Hardware Components ...

Duration: 8:09
Posted: May 13, 2021

Feb 14, 2023 · You can access the CLI on a configured or unconfigured switch by connecting the RJ-45 console port or USB console port of the switch to your PC ...

Feb 9, 2023 · The usual issue with USB is I think only USB drives up to 4GB are supported, and they need to be formatted using FAT16. So, take your USB and ...

It requires special USB from Cisco to connect with front-panel or use for 3rd party hosting applications, However, the workaround is to format the USB flash ...

Hi Osman, I had a similar problem with a C9500-40X switch that was stuck in a boot loop. Here is how I solved my issue: 1. Formatted an unused USB 16GB thumb ...